Automatic Boom Gates & Car Park Barriers

Take control of vehicle entry and exit with ParkingLink boom gate solutions. Our ULTRON Brushless DC Barrier Gate uses a 24V brushless motor, digital control system and safety-focused operating features for controlled access at car parks and commercial facilities. Ask us about boom gate supply, installation and servicing for your site.
ULTRON Brushless DC Barrier Gate
Designed for precise movement and straightforward operation, the ULTRON automatic boom gate features a springless mechanism, adjustable speed and wireless remote control for raising, lowering and stopping the barrier arm. Manual opening is also available during a power outage.
Key Performance Highlights
- 24V
- Brushless DC motor
- 6 m
- Maximum straight arm
- 1.5 s*
- Fastest rise/drop time
- IP44
- Enclosure protection
* Fastest 1.5 s rise/drop time applies to straight arms up to 4 m. Confirm speed and configuration for longer arms.
Boom Gate Features
Brushless motor control
24V DC motor with three built-in Hall limit switches and self-diagnostic learning capability.
Springless mechanism
Lever-length adjustment removes the need for spring adjustment during installation.
Smooth arm movement
Non-isokinetic operation supports rapid start-up, gradual stopping and reduced vibration.
Adjustable operation
Continuous speed adjustment and programmable automatic barrier lowering.
Flexible installation
Left/right direction adjustment and an adjustable mechanical travel limit.
Digital controller
Control functions include impact-resistance logic, ground-sensing interfaces and system connections.
Priority anti-breakage protection
The arm opens if an activation signal is received while it is descending.
Obstacle-rebound protection
The arm automatically rises when an obstruction is detected.
Breakaway arm
Breakaway-arm design for added arm protection.
Optional anti-collision
Ground-detection anti-collision functionality is listed as an option.
Manual release
Manual operation is available during power outages.
Geared drive
Three-stage full-gear reduction is designed for wear resistance.
Technical Specifications
| SPECIFICATION | DETAIL |
|---|---|
| Brochure series / variants | UBX-620AIR-L / UBX-620AIR-R |
| Model in technical table | 009D |
| Body dimensions (W x D x H) | 320 x 250 x approx. 1050 mm |
| Case material | Cold-rolled steel sheets with high-temperature paint |
| Motor | 24V brushless DC motor |
| Operating voltage | 24V / 8A |
| Power rating | 100 W |
| Input voltage | AC 220V / AC 110V, 50/60Hz (verify supplied configuration) |
| Arm raising time | Fastest 1.5 s - straight arm up to 4 m |
| Arm lowering time | Fastest 1.5 s - straight arm up to 4 m |
| Maximum arm length | Straight arm: 6 m; fence arm: 5 m |
| Motor operating temperature | -30 degrees C to 80 degrees C |
| Remote control frequency | 430 MHz (verify local suitability) |
| Remote control range | Up to 50 m in an open area |
| Protection rating | IP44 |
| Body weight | 35 kg case + 5 kg rod |
| Body colour / finish | Corrugated black; door panel in silver-grey or luxury gold |
| Standard accessories | 2 remote controls; 4 rod-handle screws (M10 x 90 mm) |
Dimensions & Arm Options
The cabinet measures 320 mm wide x 250 mm deep x approximately 1,050 mm high. The specified maximum is a 6 m straight boom arm or 5 m fence arm. The 1.5-second opening/closing figure applies to straight arms of up to 4 m; confirm speed and configuration for longer arms before ordering.